Suspension News


Now accepting Cards

Solution Graphics

Verified PayPal Merchant


Testimonials

New YSS shocks fitted to Mean Streak

The new YSS shocks are fully adjustable in both compression and rebound and can even be revalved or repaired if required. The YSS shocks have made an enormous difference. With the original Mean Streak standard shocks, the bike would jar the back if set too hard or cause the bike to wallow on undulating roads, especially two up. They had no rebound adjustment. The new YSS shocks have made a great ride, even better. "

RG 366 TRCL on the track

I got the RG 366 TRCL and had my dealer set them up for me. I was at least 2-3 seconds faster at the track yesterday than I had been before and my ground clearance was MUCH better. I would scrape foot and pegs before and have a hard time getting my knee down smoothly through the turns. I went 10mm higher on my ride height and that combined with stiffer springs gave me a much better angle/position on the bike. Another nice thing is that they look so much better than the Ohlins wannabe's that are OEM. Plus the silver/red of the YSS matches the red. "

YSS shocks - very good product

Do a search here for YSS shocks - they are brilliant - a very good product without the $$$ of ohlins. "

YSS shocks are less expensive

The Ikon shock for the GT is a gas shock with pre-load and 4 position rebound damping adjustment and more expensive than the YSS Z-302 TRL Twin shock, which is a gas shock with pre-load and 80 click rebound damping and costing less. The less expensive YSS gas shock has much finer control of the damping adjustment. "

Get YSS Suspension for your Bike


YSS Suspension Specialists
YSS Suspension
Passion, Innovation, Excellence


Search Our Site


Your Suspension Expert

DirectorWalter Preisig

Your Suspension Shop is located in Adelaide, South Australia, and was established by Walter Preisig to service the Australian bike market with a new generation of gas shock absorbers that are continuously under development by Walter in partnership with Hyperpro and YSS. Walter has been developing racing suspension for over 25 years and has a wealth of experience in suspension technics, motorcycle maintenance and customer service.

Company Background


Adelaide Wet Metal Blasting

Streetbox

Yonsin Titanium

Harley DavidsonGo to Harley Suspension


Philosophy

It's unwise paying too much, but worse paying too little. By paying too much, you lose a little money. By paying too little, you could lose everything, because what you've bought would be incapable of doing what it was bought for. The law of business balance prohibits paying a little and getting a lot. If you deal with the lowest bidder, it's wise to add a bit for the risk you run and if you do that, you can pay for something better. "

That said and with this in mind, Your Suspension Shop is servicing the motorcycle community in Australia and overseas as well as furthering the research, manufacture and development of top quality world class shock absorbers for racing purposes and casual driving without breaking your bank.

Your Suspension Shop (YSS)


X-Series — Gas Mono Shock Absorbers

The YSS X-Series was developed to cope with the growing demand of high performance gas shocks, using calibrated Teflon coated Sinter DU Bushes and heat treated Hard Chrome Shafts to make a precision product. Standard: Rebound Adjustment, Reservoir Adjustment — Optional: Ride Height Adjuster (included in price).

X-302-TRC — Gas Mono Shock Absorber
X-302-TRCL* — with Optional (L*): Ride Height Adjuster (Length Adjuster)
Length: 240 mm, 250 mm, 260 mm, 270 mm, 280 mm, 290 mm, 300 mm, 310 mm, 320 mm, 330 mm, 340 mm, 350 mm, 360 mm
Type: Self Adjusting Gas Shock with Hose to Reservoir
Features: — Pre-Load Adjustment, Rebound Adjustment 80 Clicks, Compression Adjustment
— Eyelets and Springrates Model specific or customised
Application: RACING ON and OFFROAD — for MOTORBIKES and SCOOTERS
MOTO SHOCK  
X-366-TRC — Gas Mono Shock Absorber
X-366-TRCL* — with Optional (L*): Ride Height Adjuster (Length Adjuster)
Length: 240 mm, 250 mm, 260 mm, 270 mm, 280 mm, 290 mm, 300 mm, 310 mm, 320 mm, 330 mm, 340 mm, 350 mm, 360 mm, 370 mm, 380 mm, 390 mm or longer
Type: Self Adjusting Gas Shock with Hose to Reservoir
Features: — Pre-Load Adjustment, Rebound Adjustment 60 Clicks, Compression Adjustment 40 Clicks
— 36 mm 50 Micron Steel Bore and Radial Sinter Piston
— 16 mm Hardened Shaft
— Low Friction, Long Life Seal Block
— Bearing and Bushes to suit each Model
— Dampening and Springrates Model specific
Application: RACING ON and OFFROAD — for SOLO, SIDECARS, QUADS, CARS, MOTOCROSS, STREET BIKES
MOTO SHOCK  
X-366-TRW — Gas Mono Shock Absorber
X-366-TRWL* — with Optional (L*): Ride Height Adjuster (Length Adjuster)
Length: 240 mm, 250 mm, 260 mm, 270 mm, 280 mm, 290 mm, 300 mm, 310 mm, 320 mm, 330 mm, 340 mm, 350 mm, 360 mm, 370 mm, 380 mm, 390 mm or longer
Type: Self Adjusting Gas Shock with Hose to Reservoir
Features: Billett milled GP Shock for High End Racing
— Pre-Load Adjustment, Rebound Adjustment 60 Clicks, Hi-Low Speed Compression Adjustment
— 50 mm 50 Micron Steel Bore and Radial Sinter Piston
— 16 mm Hardened Shaft
— Low Friction, Long Life Seal Block
— Bearing and Bushes to suit each Model
— Dampening and Springrates Model specific. Eyelets and Fork Fittings to suit any Model
Application: RACING ON and OFFROAD — for SOLO, SIDECARS, QUADS, MOTOCROSS, STREET BIKES
MOTO SHOCK  
X-506-TRC — Gas Mono Shock Absorber
X-506-TRCL* — with Optional (L*): Ride Height Adjuster (Length Adjuster)
Length: Any Length
Type: Self Adjusting Gas Shock with Hose to Reservoir
Features: — Pre-Load Adjustment, Rebound Adjustment 60 Clicks, Compression Adjustment 20 Clicks
— 50 mm 50 Micron Steel Bore and Radial Sinter Piston
— 16 mm Hardened Shaft
— Low Friction, Long Life Seal Block
— Bearing and Bushes to suit each Model
— Dampening and Springrates Model specific
Application: for SOLO, SIDECARS, QUADS, CARS
MOTO SHOCK  
X-506-TRW — Gas Mono Shock Absorber
X-506-TRWL* — with Optional (L*): Ride Height Adjuster (Length Adjuster)
Length: Any Length
Type: Self Adjusting Gas Shock with Hose to Reservoir
Features: Billett milled GP Shock for High End Racing
— Pre-Load Adjustment, Rebound Adjustment 60 Clicks, Hi-Low Speed Compression Adjustment, 20 Click Low Speed and 20 Click High Speed Compression
— 50 mm 50 Micron Steel Bore and Radial Sinter Piston
— 16 mm Hardened Shaft
— Low Friction, Long Life Seal Block
— Bearing and Bushes to suit each Model
— Dampening and Springrates Model specific
Application: for SOLO, SIDECARS, QUADS, CARS, MOTOCROSS
MOTO SHOCK  

Shock Absorbers for any Motorcycle

The SUSPENSION SHOP is your One-Stop Suspension Shop with a vast range of products at hand - ready made and also customised for any motorcycle. Feel free to call THE SUSPENSION SHOP to discuss a solution for your technical needs.

Suspension Shop Phone +61 (08) 8284 8033


We also have many individual YSS Replacement Parts for Your Suspension

YSS Replacement PartsYSS Parts